User Tools

Site Tools


visiesrv2_configuration

This is an old revision of the document!


Table of Contents

visiesrv2

the original order from dell can viewed here.

hardware

This is a Dell PowerEdge R330 with the following configuration:

  • Intel Xeon E3-1270 3,8GHz, 4C/8T (72Watt)
  • 16GB UDIMM
  • 10k RPM SAS 2.5 inch 600GB (3x)
  • 240Gig SSD 6Gbps 2.5 inch (2x)
  • PERC H730 RAID controller (in host mode, we don't use hardware RAID)

software

Ubuntu 16.04 LTS is installed on md0, which is a software RAID1 of the 2 240 Gig SSD's :

cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] 
md0 : active raid1 sda1[0] sdb1[1]
      224574464 blocks super 1.2 [2/2] [UU]
      bitmap: 1/2 pages [4KB], 65536KB chunk
visiesrv2_configuration.1521819886.txt.gz · Last modified: 2018/03/23 15:44 by 143.169.49.101